Product Categories

DD-SL-1400s Simple Slitting Machine

Category:

Technical parameters:
1. Power supply: AC 380V
2. Air source: 5bar
3. The maximum width of the material: 1000mm
4. Minimum slitting width: 25mm
5. Maximum unwinding diameter: ф800mm, 3inch shaft
6. Maximum winding diameter: ф300mm, 3inch shaft/1inch shaft
7. Maximum speed: 150m/min
8. Motor power: 2.2kw
9. Length X width X height: 1292x1523x1237

Online Quotation Request

Return to list

Contact number: 13702541331

Product Description

1. Technical parameters:
1. Power supply: AC 380V
2. Air source: 5bar
3. The maximum width of the material: 1000mm
4. Minimum slitting width: 25mm
5. Maximum unwinding diameter: ф800mm, 3inch shaft
6. Maximum winding diameter: ф300mm, 3inch shaft/1inch shaft
7. Maximum speed: 150m/min
8. Motor power: 2.2kw
9. Length X width X height: 1292x1523x1237

2. Structure
1. Frame: Steel plate thickness 35mm
2. Unwinding: 5kg magnetic powder brake controls the unwinding tension.
Matching: 3 inch inflatable unwinding reel, 1 piece. Not equipped with correction device.
3. Guide roller: φ80X1000mm dynamic and static balance guide roller is adopted.
4. Slitting parts: Flat knife Slitting form: The bottom is equipped with groove rollers and 30 knife handles.
5. Rewinding: ①Swing arm type unwinding film. ②The upper and lower rewinding shafts are equipped with: 1 inch shaft: 2 and 3 inch shaft: 2
③ Directly driven by a 2.2KW motor, the speed is not constant, and it becomes faster and faster as the coil diameter increases.
④ The upper winding shaft is equipped with a pneumatic pressure roller.
6. Operation panel: ①A speed/meter controller ZX-338 is installed on the panel to set the stop meter.
② Manual tension controller for unwinding.
7. Electrical: Schneider electrical components are used.
8. Pneumatic: Use AIRTAC pneumatic control components and air cylinders.